2006 Supercharged Viper

Our customer brought us a 2006 Viper saying that he wanted to get more out of it at the dragstrip.  We had previously installed a Novi 2000 Supercharger kit but he said that he had grown tired of that power and wanted more.

We started by pulling the stock motor out in preparation of adding a forged rotating assembly.....

 

We added JE Boost Pistons and K1 Technologies connecting rods.  We finished out the rotating assembly with Total Seal Rings and Clevite bearings throughout.

 

 

After we assembled the motor we went to town on the drivetrain upgrading the factory axles to much beefier Driveshaft Shop axles and swapping the factory 6 speed out for a more boost friendly 2 spd. powerglide with an ATF bolt together torque converter. 

We also added a billet in-tank fuel hat set-up that is home to (3) Walbro 400LPH fuel pumps to meet the needs of the 1300+ hp the viper would be making. 

All of the engine management needs will be controlled by an AEM INFINITI engine management system modified to work with the vipers V-10 power plant.

 After all of the performance issues were taken care of we added a touch of color by painting the valve covers and intake manifold to match the Viper's factory color and added some custom graphics to the intake for a little flash.

 

After getting everything wrapped up we took it down to one of the local tracks for it's maiden voyage.  First pass off of the trailer it went 9.62@144 with a soft 1.51 60ft. leaving off of the foot brake.  With a little suspension work and some seat time and it is safe to say 8's are just around the corner for this snake.

 

 

You just need to pick your moment and at this when to decide everything generic levitra to learn when there is a need levitra generic to help you. It will resolve the problems.

Financing Available