$15.99 each

SB Chevy oil pump shaft kit

134-7901 SB Chevy oil pump shaft kit

$12.99 each

BB Chevy oil pump drive shaft

135-7901 BB Chevy oil pump drive shaft

$337.08 each

COMP Beehive 3 Valve 4.6L, Valve Springs

26113-24 Beehive 3 Valve 4.6L, Valve Springs 24 springs

$359.10 each

COMP Cams Titanium Retainers; 3 Valve, 4.6L, for 26113

702-24 COMP Cams Titanium Retainers; 3 Valve, 4.6L, for 26113 valve spring

$123.99 each

Melling Oil Pump - High Pressure - Standard Volume

Melling High Pressure Oil Pump LS1/2/6 4.8/5.3/6.0 10295

Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.

High pressure performance upgrade for M295.

Stock volume, 10% increase in pressure over M295 oil pump.

The cast aluminum housing is CNC machined and hardcoat anodized.

The cast iron cover is CNC machined and phosphate coated.

The relief valve features a screw in valve plug with the optional lower stock pressure spring supplied.

Uses stock 1-1/4” bolt on screen.

 

$245.99 each

SBC LS1 Main Studs 4.8/5.3/5.7/6.0

234-5608, LS Series, Chevy, 4.8, 5.3, 5.7, 6.0L, Kit

 

Leading engine builders rely on these main studs.
These ARP main studs are made from 8740 chromemoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength hex nuts.

$1,535.95 each

LS1 ROD 6.125 with 7/16

LS1 ROD 6.125 with 7/16
$405.99 each

Fluidampr Chevy LS3, L99 Balancer

Fluidampr Chevy LS3, L99

$149.99 each

Melling LS1 High Volume Oil Pump

MEL 10296 Melling LS1 High Volume Oil Pump

$28.49 each

Water/Methanol Injection Inline Filter

Water/Methanol Injection Inline Filter

$160.45 each

50 PSIg Stainless Sensor Kit

150 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes: 150 PSIg Stainless Sensor, Connector, Pins & 1/8" NPT to -4 Adapter

$900.00 each

Aeromotive Pro-Series Fuel Pumps

Fuel Pump, Module, w/ Fuel Cell Pickup, Pro-Series

$213.71 each

A1000, 4-Port Carbureted Bypass Regulator

The A1000 Bypass Regulators were designed for use with our A1000 and Eliminator Fuel Pumps or similar style EFI pumps in a carbureted application. These regulators are perfect for naturally aspirated or ‘blow-through’ supercharged engines.

  • Base fuel pressure adjustable from 3-15 PSI.
  • (1) ORB-10 inlet port and (1) ORB-08 return port.
  • P/N 13224 provides (4) ORB-06 outlet ports and 1/8′ NPT gauge port.
  • Fuel pressure rises on a 1:1 ratio when referencing boost.
  • Bypass design provides the ultimate, dynamic fuel delivery system.
  • Ideal for converting from fuel injection to carburetion using the stock, in-tank pump.
  • EFI conversions will require a larger-than-stock return line for proper low pressure control.
Results 1 - 13 of 13

Financing Available

Financing Available